DIY: Necklace Makeover

I bought this adorable, snake-skin collar necklace from Kohls a few years ago. Like most accessories, it began to show wear and the glue from the snake skin began to peel off.

Rather than throw it away, I decided to attempt to re-skin it with some new material. I bought a roll of sticky drawer liner from Target (yep, for $2), and cut it to fit by tracing the old snake-sin pieces.

I then peeled the back of my cutouts and stuck them to the necklace!

Thanks for stopping by the Humble Hammock!

Cara

Before & After Driveway Rehab

For those of you out there who own a home - power to you! Owning a home is far more work than just lawn mowing and cleaning. You break things, other things break on their own; then you either shell out money to fix them or pay to have them fixed. 

When we became home owners we knew that our driveway was going to need replaced. We wanted to make the improvement fast so that we could enjoy it (if) before we ever moved.

WARNING: this photo is graphic and is only intended for mature audiences.

(haha, okay, but really... :\ )

Beyond being visually unappealing, we couldn't get through winter without shoveling chunks of asphalt into our yard. We regularly tracked our driveway into our kitchen on our shoes and we had to sweep our garage of rocks. 

We finally got tired of it (after we had saved enough money) and called D&M Concrete based out of Greenwood, Ind. They weren't our first call, but they were the only concrete contractor to give us the time of day AND a reasonable quote. 

We booked them in the fall of 2015 and by March of 2016 they had broken ground and laid a new driveway and sidewalk in roughly two days. 

Check out their progress....

We also had D&M put in a new sidewalk and install the first two feet of our garage floor (due to pitting). 

These images were taken as soon as the framing was pulled off - WOW!!

And now - the stunning end product! 

THREE WEEKS (yes, it really felt that long) later we were able to remove the "do not drive" tape. This meant we could finally park in our garage again AND use the driveway. We're much happier with our new curb appeal and love the functionality!

Some tips for those looking to redo their driveway:

• Get more than one quote! We originally thought we would do asphalt because people kept telling us that it was cheaper than concrete. "People" were very wrong. The price fluctuates (much like gasoline) and you should do your homework!
• If your contractor wants money before they do any work challenge them. A great contractor won't need money up front. They'll make sure it's perfect and your happy before they take your money. Besides, you want the job done, right?
• Have the contractor over and walk through your plans. Have them draw it out and review those plans again before they start the work. Over communicate to be sure that you're getting EXACTLY what you want. It's a pricey mistake if they get it wrong.
• Be flexible when it comes time for the work to happen. Weather is a huge factor when it comes to pouring concrete and sometimes your job will be bumped up or pushed back. Spring is a great time to have a job like this done because (hopefully) the only elements you're battling are rain - at least in Indiana. Freezing temps require additives to the concrete that jack up the price $1-$10 per yard!
• Prepare for a project like this at least 1-2 seasons in advance. Contractors schedule their jobs pretty far out so you'll want to be having these conversations before the moment you want the job done. 
• Be honest with your contractor and share not only your budget but where you're hoping to save costs. They'll be able to tell you whether or not pouring more items, like a sidewalk, may actually be cost effective for you based on the mixing quantity of the cement truck. 
• Review your contract and be comfortable with the terms. Add an addendum or initial changes in the document if you have reservations. This is particularly true for those wanting cash in advance of the job.
• Get educated on your new concrete or asphalt and learn about it's care. Concrete for example requires a spray on sealant every 2-3 years. It's also not good to power wash it but rather to use bleach to kill the fungi and bacteria growing on it and gently power wash it off afterwards. 

Thanks for stopping by the Humble Hammock!

Cara

DIY: Plant Stand Makeover

Thrifting is all about the hunt. Truth be told, I've spent a couple of years looking for a specific item. Sure, I could go purchase it new from a big box store or even look on eBay, but the reality is that the hunt is more exciting than finding the item. Sometimes I even find what I'm looking for and decide to be picky and pass that particular product over to find one in better shape. 

This spring I took my mom antiquing, or "teeking" as my grandmother calls it. It's something that we both enjoy and it's a good excuse to spend some quality time together. While out and about in some unchartered teeking territory, we came upon not only a humble little shop, but a honey hole of inexpensive and unique items.

The only find I'm going to blabber on about today is this $7 plant stand. It was handmade by some form of carpenter, who knows how long ago. I was immediately drawn to the size (which would pair well with a taller stand and a ground-level pot) and the fun shape.

It doesn't take a rocket scientist to see that all this little gem needed was a fresh coat of paint and new home. Both are things that I happen to be able to provide.

I made quick stop in the paint aisle during my subsequent home store trip and picked up this $3 can of shiny gold paint. Then I zipped home and ran the grittiest sandpaper I could find over the stand.

Within ten minutes I took this stand from 1970 to 2016 and I couldn't be happier with the end result!

Thanks for stopping by the Humble Hammock! Be sure to follow this page or bookmark it in your browser for more great DIY inspiration later!

DIY: Staining Furniture

Thanks for sticking with me through part two of my furniture overhaul! I know in the last post I focused heavily on the curio cabinet, but today I'm going to show how I stained my accompanying tables and then reveal the finished camera holder.

As I mentioned, the curio cabinet was made of pine wood. The end tables were already cherry. Since I wanted the two to match it was easier to use a red/cherry stain on the cabinet versus trying to dull down the redness of the tables.

Miniwax (found at your local Lowes / Home Depot) makes some great stain that enhances the quality of the wood without looking overly waxy/finished. I did my due diligence and scoured the internet for feedback on how to match pine to cherry and landed here. I'm very happy with the result but I'll leave it to you to determine how well it worked.

I started by adding one coat of stain to the tables and leaving it on for five minutes before wiping away the unabsorbed stain. I didn't want the tables to be much darker than they already were so the less time the better. I then took the bottom side of one of the curio cabinet shelves and tested (in five minute increments) how long it would take to get the closest color match. The result - 20 minutes!

Here's a half and half of the table progress. Talk about instant gratification!

This is the color difference between a stripped pine shelf and one being stained (before excess was wiped).

And now... the end result(s)! The staining took a bit longer (~1 week) with application AND dry time. I did this during the summer months (in humid Indiana) and it remained tacky longer than I'd hoped. 

*More on my fabulous lamps at another time.

DIY: Stripping Furniture

In due time I'll write a blog post about my Brownie Camera Collection and the hunt that continually ensues. Until then, I'll tell you that I've been looking for a curio cabinet for these beautiful cameras for nearly a decade. 

Most of my friends have heard about my infatuation with Facebook's garage sale groups. I've alluded to them before. I rarely purchase items but I'm always on the prowl for very specific items. 

I found this cabinet *yes, this is a screen shot from my phone* and knew right away that the scalloped portion on top would pair nicely with a pair of vintage end tables my mother gave me. The going price was $75, but I managed to talk the seller down to $60. There was a loose leg and the glass was popped out on one side, but I had faith in myself and my husband's tool box.

Pine can be stained to match other woods fairly easily as it has a neutral undertone and can be tinted to match woods with stronger hues. So off I went to strip this pine cabinet and ultimately tint it to match my cherry end tables. 

For those of you who have never stripped furniture I recommend pulling the item completely apart so that you can move quickly once you get the stripping process started. Be sure to make room for the wood to dry (standing up) and invest in some thick rubber gloves (I use elbow-high dishwashing gloves from the local grocery). I also like to do the stripping over a drop cloth or trash can to mitigate extra mess.

Citristrip (sold at Home Depot) is one of my favorite stripping agents. It costs less than $20 and will last through multiple pieces of furniture. It's orange based unlike many of the harsh chemical based strippers. The smell is far less overpowering, but don't be fooled - it still packs a tough strip. When using this product I pair it with:

1.  blue shop towels
2. a stripping tool
3. old plastic cup and sponge
4. elbow-length rubber gloves

To strip:

• Slip on your rubber gloves
• Pour some Citristrip into the old cup and add the sponge
• Glob the product onto the wood with the sponge and begin scrubbing/rubbing onto the wood

At this point the wood will begin to appear watery as the stain/top coat loosens. Keep working the sponge and breaking loose the old covering. If it becomes tacky you'll need to add more Citristrip and keep it moving. DON'T TRY SCRAPING IF IT'S TACKY. You will easily damage the grain of the wood. 

Don't cut corners like I did in these photos. These gloves were leaking Citristrip and caused my hands to peel for more than a week. Don't do this to yourself...

Once the watery top coat is covering the top of the wood, grab your scraper tool and begin to apply pressure and push the solution to the top of the tool before wiping in your shop towel. See the demonstration below...

This is going to be a longer process for pieces with multiple layers of sealant or paint. Be prepared to take your time on each piece to do a quality job before moving on to the next piece. If the wood appears "shiny" after the top coat has been removed there is still remaining topcoat. You may need to repeat steps 2-3 times to see results.

Here's my before and after progress!

And here is the stripped cabinet! This cabinet had one layer of a light stain and came off fairly easily. I had the cabinet and shelves stripped in just a couple of hours.

These tables weren't as compliant. Although incomplete, you can see the difference in the thick coated seal on the back table versus the semi-stripped front table. Each of these tables took me 3-4 hours of tedious stripping. The rounded detail on the core and legs were a challenge for my flat headed stripping tool.

Thanks for stopping by the Humble Hammock! Stay tuned for part two of this post where I cover the staining process!

Refresh: Car Interior

Since I was 16, I have always been made fun of by my friends for having an immaculate car. The thought of half eaten McDoubles and French fries crammed between seats still makes my OCD flare. Unlike most of my friends I dedicated a couple hours a week to vacuuming, detailing, washing and waxing my car. 

Fast forward a decade and those old habits have yet to fizzle out. I upgraded my car (see How to Buy a Car if you need help in that regard) and I was determined to keep it like new. 

That's cute and all, but life happens. It took the first ride in my backseat to see what had been behind my head all that time - upholstery stains! From the moment I saw them I began concocting the perfect  removal remedy in my mind. 

Before I share that with you, go ahead and cast judgement from these images. 

Recipe for Removal:

1. Acquire baking soda, vinegar and water. Pour one part vinegar and three parts water into a cup. Add one tablespoon of baking soda and allow to fizz. 
2. Take a clean microfiber cloth or towel and dip it into the mixture before working it in a circular motion over the stain on the upholstery. 
3. WARNING: You may need to clean the entire upholstery if you clean the stain too well! Start with light pressure when rubbing and allow the spot to dry before doing touch up later. 
4. Air dry and repeat if necessary. 

Ta-da; threat averted! 

Thanks for stopping by the Humble Hammock! Do you have any car cleaning hacks?

Desk Chair Refresh

DISCLAIMER: This post is extremely simple and is only being posted for those with before/after infatuations.

I've had this chair since I was a little girl. It was once white, then brown, and most recently cream with a monogram (see below).

You probably know by now that I can't leave any craft unattempted, so I decided to upgrade my sturdy old chair with a fresh coat of paint. I like to categorize the covering of the monogram and cheesy craft paint as "adulting."

Sherwin Williams, among other brands, have paint samples (yes, for walls. if you can't handle that I put wall paint on this chair you are free to continue surfing the internet) that go on sale every so often at various home stores for somewhere in the ballpark of $2 or less. I got this 3.75 oz jar from Lowes in January and chose a nice shade of blue/grey called Grayish.

Truth be told it ended up on my chair because we repainted our entire downstairs hallway with a different blue/grey paint and I wasn't going to use this sample on any of my walls. 

It took two coats a little patience but it didn't look too shabby once I finished! I have a chair cushion that I use on this chair that I'll be recovering to match. We'll save that whole excursion for another post...

And now.... before and after!

Thanks for stopping by the Humble Hammock. Come back soon to see what other projects I manage to tackle!

Cara

Upcycled Patio [Pt. 2]

If you missed out on the initial stages of the patio makeover, take a moment to get up to speed. Then join us here...

As new homeowners it was fair to assess that we knew very little about anything. Since we were going to learn as we went anyway, why not create the patio of our imaginations, right? 

After searching on Google and Pinterest, I came across this inspiration and showed it to my husband. We agreed that not only did it look feasible for our skill set, but affordable too. So we started noodling the numbers to estimate what we should expect to spend with landscaping stones/seal/glue, mulch, edging materials, plants, and patio furniture.

During the winter months we spent our time perusing Menards for the retaining wall rock. The plan? Leave the concrete pad and build a rock wall on three sides with two openings to enter and exit the space. We settled on Catalina (tan) from Menards and ordered it in store. 

Fortunate for us, Menards delivered the 2,000+ pounds of rock. But they did so on the rainiest spring day Indiana could conjure and they had to park the semi in the street while using the fork lift to unload two pallets in our driveway rather than our back yard. Yours truly got to gopher them through the garage before stacking them in our workspace so as to save the yard while Andrew was traveling for work. I have to admit, I did take a lot of pride in that...

After my Herculean efforts I decided to plow forward with other parts of the project while Andrew was swooning over his precious wall. I've always thought my freehand lettering was relatively decent so why shouldn't I be able to "free shovel" the curvy edging for our landscaping? Here's my progress...

The trick is to really hollow out the space for your edging. It's easier to fill in a space that's too deep and adjust as you're laying it and fill in the dirt with your hand as you go. 

You've heard me say it before... one man's trash is another man's treasure. Sorry to be so cliche', but it's true. In true fashion I sold these pallets to other DIYers on our local garage sale site so that I could buy flowers for this new space!

While edging (see progress behind the bulbs) I got distracted by these plants that have continued to come up in the middle of our back yard. In my current shovel-obsessed state I left no bulb unearthed and replanted them in the new space where other landscaping and plants would reside.

UPDATE: they did return this year but have yet to produce a flower. :(

Meanwhile, in retaining rock wall land...

And then while I was on a bachelorette party to Las Vegas he and his brother finished this masterpiece! 

Now this next part intimidated me the most. Most that know my experience with plants know that I do not possess a green thumb. In fact, I'm pretty sure I've returned five or six succulents to Home Depot because I have no idea how to make them happy. 

During this process there are two humans, constantly wrangling the lines of thrifty and "this doesn't look thrifted" to come up with solid landscaping options. This first beauty (which we bought two of), was on super sale for $6. It's an Azalea which I am happy to report DID survive through the winter.

Quick rabbit hole.. My husband is still driving his "truck" from high school and their love runs deep. We can debate the term "truck" on another blog post, but I often entice him to prove truck-like attributes. This ended with him severely overloading the cab and bed with more plants than I could possibly kill in one afternoon and gave me one of my favorite homeowner memories.

Those five precious arbor vitae that you see in the back were planted that afternoon. Yes, they too are still alive and well (believe it or not)! You can see my edging work below too - before we plucked the grass and mulched.

Slow but sure, it's come along!

I hate mulch. I think fresh mulch smells like dog poop and I hate putting it all around my house so that when outside all I can think is that someone is slacking on the poop scooping. None the less, Andrew insisted we get mulch, so we visited Edgewood Feed and Seed and settled on the deep brown option from their sample box. Which yes, is even further reminiscent of the poop simile.

Mulching isn't anything to write home about - especially the first time you cover all of the space you want to much. Three or four yards later (I forget honestly), after unloading it in the blazing sun and pouring down rain I was just happy to be done. 

When we did finish mulching, Andrew laid grass seed along the edging to fill in the areas we'd disrupted during our project. It grew very well and was filled in before the end of the season.

I even did edged the side bed too. After we bought three burning bushes I learned that they're not indigenous to Indiana. Unfortunately for me I was face-to-face with a forester and had to appear revolted when she told me that her sister had tried to put the horrible plants in her landscaping. I guess the bonus is that they haven't technically turned red and proven to us that they're truly burning bushes so that makes me feel less guilty. :|

Projects like these don't really end in your back yard. Before you know it the front yard looks like garbage against the remnants that peek through in the back. Which led to this...

Then this...

And now... do you remember what we started with?

Here's the transformation!

When it was all said and done it came together really nicely. We've already made additional improvements since this was taken late last summer, but what a transformation!

Side note, continue reading to learn about our patio set and how I stained it.

Thanks for stopping by the Humble Hammock! What questions did you have from this project?